Pack Leader PRO-625W, Operation Manual

Page: 10 / 131

 
1.
2.
3.
4.
INSPECT BEFORE
OPERATING
• Make sure the power is
connected to the correct
power source
• Adjust machine to the
specified product range
• Adjust the height of
label applicator to the
appropriate position
• Adjust the guide rails
according to the width of
the product
• Adjust the object sensor
to the correct position
• Adjust label sensor to
the proper setting
• Make sure the conveyor
is clear of extra objects
• Adjust separator wheel
to accommodate the
width of the product
Do not put hands or fingers on the inner tube when adjusting the
height of the foot stand. Immediately lift up the conveyor if hands
or fingers get trapped.
Beware of your clothes, hair, gloves or anything loose when the
machine is turned on, as these can be easily caught in the conveyor
or running roller that may cause injury.
Do not touch the conveyor, roller or paper receive axis when
machine is running.
Be sure hands are completely dry before inserting the plug into the
outlet. Especially, in the food industries or in wet environments.
| 10
SAFETY REGULATIONS
DANGEROUS
DANGEROUS
SAFE
SAFE