background image

12.

VIII. Surface Maintenance

A. Surface Maintenance

1. Please clean the range hood surface regularly with warm soapy water 
    and wipe with a cotton cloth to prevent grease from accumulating.
2. Please do not use harsh cleansers or coarse material to clean the surface 
    because that will damage the surface.
3. A non-invasive stainless steel polish is recommended to polish the surface 
    after cleaning.
4. Please use soft cloth for polishing because it will make your range hood
    surface shinier.
5. Please do not use cleaning solutions that have bleach as an ingredient.

B. Surface Cleaning and Maintenance

1. Always disconnect from power supply before cleaning.
2. Clean both exterior and interior of the hood for long 
    lasting.  Do not use abrasive cleanser.
3. Fan’s protection grille can be detached for cleaning by 
    removing the screws with a screwdriver. 
    It must be reinstalled before using the range hood again.
4. Oil dish on the grille can also be detached for cleaning 
    by turning the dish counter-clockwise.
5. The oil cup in the center of the hood for holding grease
    can be detached and cleaned regularly.
6. Make a habit of turning on the range hood first before
    turning  on the stove to avoid high temperature in the
    kitchen.

counterclockwise to detach

12.

八.機身表面保養和清潔

一.機身表面保養

1.請定期以熱肥皂水和棉布擦拭機身以防油垢堆積

2.請勿使用腐蝕性洗碗精和材質過粗的布料擦拭

以免傷害到機身表面

3.擦拭完成後建議使用無刺激性的不鏽鋼拋光劑來進行第二次擦拭

4.請使用軟布輕擦

您的油煙機表面將會更加光亮

5.請勿使用含有漂白成分的清潔液

二.保養和清潔

1.清潔前

務必要切斷電源

2.定期清潔抽油煙機的內外側

可以保持抽油煙機壽命

  切勿使用研磨性清潔劑

3.使用螺絲起子移除保護網的螺絲後

可將保護網取

   

下做清潔

完成清潔後

必須重新鎖回保護網

4.按逆時針方向旋轉(即反轉)

可取下保護網的小油碟

  並做清潔

完成清潔後

必須重新裝回小油碟

5.抽油煙機中央的小油碟可拆下做定期清潔

6.在開啟煮食爐前

請先開啟抽油煙機以免廚房溫度太高

。 

正轉裝置

反轉拆卸

Summary of Contents for SC8130S



















Reviews: