background image

2

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS MACHINE!

WARNING:  To reduce the risk of fire, electric shock or injury:

1. You must have training in the operation of the machine before using it.

  READ THE

INSTRUCTION BOOK.  

If you do not understand any instruction, ask your supervisor.

2. Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine.
3. Read the labels carefully on the machine.  Do not cover them for any reason and replace them if

damaged.

4. Do not operate this machine unless it is completely assembled, inspect the machine carefully before

operation.

5. Pay close attention to other people and especially children while operating this machine.
6. Be a careful operator, do not strike shelving or scaffolding, especially where there is a danger of falling

objects.

7. Machines can cause an explosion when operated near flammable materials and vapors.  Do not use this

machine with or near fuels, grain dust, solvents, thinners, or other flammable materials.

8. In case of fire, use a powder extinguisher.  Do not use water.
9. Do not use this machine as a means of transport.
10. Do not use acid solutions that could damage the machine.
11. Adjust your speed to the conditions of the floor.
12. Do not turn the machine on a ramp.  Do not stop and leave the machine on a ramp or incline.
13. When the machine is parked, move toggle switch to the OFF position.
14. During any maintenance operation disconnect the power supply from the machine.
15. Lead acid batteries generate gases that can cause an explosion.  Read the instruction manual supplied

with the battery charger.  Keep sparks and flames away from batteries.

NO SMOKING

.  Charge the batteries only in an area with good ventilation.

16. Do not use a charger if the power cord is damaged.
17. Always wear eye protection and protective clothing when working near batteries.  Remove all jewelry.

Do not put tools or other metal across the battery terminals, or the tops of the batteries.

18. Check the level of the electrolyte every time you charge the batteries.  If the level is low, add distilled

water only.

19. Maintenance and repairs must be performed by authorized Service Centers only.  Make adjustments

according to the specifications given in the manual for this machine.

20. Keep the electrical parts of the machine dry.  Do not wash the machine with direct water jets or high

pressure, nor with corrosive material.  For storage, keep the machine in a dry building.

21. Solutions or cleaning materials used with this type of machine can leave wet areas on the floor surface.

These areas can cause a dangerous condition for the operator or other persons.  Always put
CAUTION signs near the area where you are working.

22. Do not reach under shrouds with fingers, hands, or toes when machine is running.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for FURY 21 HSB









Reviews: