User Manual
PW-FE1-4Eth
E1-Ethernet Converter
www.pacificwave-wireless.com
Page 15 of 16
5.6 Common Questions and Answer.
(For independent interface converter, reference for frame bridge)
No.
Symptoms
Causes
Remedies
1
The power indicator
does not light after
starting up.
The power
circuit has
a failure.
1. The power is not connected.
Check the contact of power
Cord and its converters.
2. Failure at internal power
module. Send back to factory
for repair.
2
Indicator LNK does
not light when the
Ethernet network
is connected.
Integrity
test of link
has not
passed.
1. The type of the cable does
not meet DTE/DCE modes of
Ethernet ports from Device..
2. The crystal head of the cable
is not well molded. Check
Quality of UTP cable.
3. The rate setting of converter
or the network card is wrong.
See 5.3.
4. The internal circuit of the
equipment is damaged. Send
back to factory for repair.
