User Manual
PW-FE1-4Eth
E1-Ethernet Converter
www.pacificwave-wireless.com
Page 7 of 16
4. Installation and panel description
4.1. Unpacking
Check the accessories and spare parts when opens the package.
■ FE1-4ETH Bridge
■ Operation manual
■ A supply cord (only for AC type)
■ Two type of connector/plugs : BNC or RJ45
In case of missing or any damage during transportation, immediately
contact our offices or agencies.
4.2 Front and rear panel of the device
4.2.1. The front panel of the
FE1-4ETH
bridge
The front panel of the FE1-4ETH Bridge is shown as below
Figure 2 front panel of
FE1-4ETH
Bridge
Explanations for the two rows of indicators at the left are as follows:
POWER: Power. Always lights after starting up.
LK/AT1:Flickers if ETH1 is connected and transmitting data.
LK/AT2:Flickers if ETH2 is connected and transmitting data.
LK/AT3: Flickers if ETH3 is connected and transmitting data
LK/AT4: Flickers if ETH4 is connected and transmitting data
