manualshive.com logo in svg

Pacific Research BMX-III-18, Operation And Technical Manual, Page: 51 / 132

Share
Download
Pacific Research BMX-III-18 Operation And Technical Manual Download Page 51

REVISION C

BMX SERIES III CONSOLE

43

PACIFIC RESEARCH & ENGINEERING

Switch S205 sets the Cue and Solo reset functions. S205-1 determines if CUE resets when the module
is turned ON. S204-2 determines if SOLO resets when the module is turned ON.

Switch S206 is only found on modules with the Sends option. The Sends normally follow the ON/OFF
status of the module. For applications that require continuous Sends, such as on or off-air telephone
contest recording, the PRE-fader Send audio can to be set “on” and available at all times by closing S206.
This setting engages the Send relay whenever the PRE button is engaged, regardless of the ON/OFF
status of the module.

Switch S207 is a two-station switch that enables the ready lamp function for each input. When set
closed, the OFF lamp follows the module’s ON/OFF status. When set open, the OFF lamp is controlled
by the Ready Logic coming from a peripheral device. This allows the OFF lamp to function as a “ready
indicator,” to easily alert the operator to the status of the cart machine, tape player, etc. connected to
the module.

Summary of Contents for BMX-III-18





































































































































Reviews:

No comments