manualshive.com logo in svg

Pacific Research BMX-III-18, Operation And Technical Manual, Page: 2 / 132

Share
Download
Pacific Research BMX-III-18 Operation And Technical Manual Download Page 2

REVISION C

BMX SERIES III CONSOLE

PACIFIC RESEARCH & ENGINEERING

PR&E DOCUMENT #75-10

STATUS PAGE

(Revision C - June 1999)

This listing provides a reference of current pages of this document, and their revision numbers (i.e., A.1, A.2, etc.).
When a revision to this document is received from PR&E, simply replace the old pages with the new ones, discard
the old pages, and post the new status page in the front of this manual (NOTE:  It may be desirable to retain
replaced status pages in order to have a record of document changes).  If deemed necessary by PR&E’s
Engineering Department, comment information relating to any change may also be included on this page.

Page No.

Revision

Comments

ALL

B

Corporate Name Change

4,5,78,89

C

Standard output level is now

90,100,101

+4 dBu instead of +8 dBu.

References in text updated.

ALL

C

Files changed to PC format.
Text & graphics updated.

i

Summary of Contents for BMX-III-18





































































































































Reviews:

No comments