REVISION C
BMX SERIES III CONSOLE
42
PACIFIC RESEARCH & ENGINEERING
2.9.2 Stereo Line Input Module Option Switches
The illustration below provides the locations of the Stereo Line Input Module internal option switches,
and defines their functions.
Switch S7 sets whether the module’s Direct Output follows the ON/OFF status of the module or has
continuous audio output.
Switch S200 is an eight-station switch that can enable muting of the Control Room, Studio-1 and
Studio-2 on the A and/or B inputs (typically only used when a preamplified microphone is connected
to the module). S200-4 and S200-8 separately enable the timer reset function for each input. When
closed the console timer resets at module ON.
1 2 3 4 5 6 7 8
OPEN
1 2
O
N
ON
C1
C2
1
2
12
O
N
S7, Logic Assignment Selector
Function
C1 (Down): Direct Output follows module ON/OFF.
C2 (Up): Direct Output continuous.
S206, Logic Assignment Selector
OFF (OPEN): Sends follow ON/OFF.
ON (CLOSED): Sends always active with PRE-fader
selection.
Function
S205, Logic Assignment Selector
OFF (OPEN): No CUE reset function.
ON (CLOSED): CUE resets with module ON.
Function
#
1
OFF (OPEN): No SOLO reset function.
ON (CLOSED): SOLO resets with module ON.
2
S200, Logic Assignment Selector
Function
#
ON (CLOSED): Control Room mute enable.
ON (CLOSED): Studio-1 mute enable.
ON (CLOSED): Studio-2 mute enable.
ON (CLOSED): Timer reset enable.
ON (CLOSED): Control Room mute enable.
ON (CLOSED): Studio-1 mute enable.
ON (CLOSED): Studio-2 mute enable.
ON (CLOSED): Timer reset enable.
1
2
3
4
5
6
7
8
Input
A
A
A
A
B
B
B
B
S207, Logic Assignment Selector
OFF (OPEN): Ready lamp function enabled.
ON (CLOSED): No Ready lamp function.
Function
#
1
OFF (OPEN): Ready lamp function enabled.
ON (CLOSED): No Ready lamp function.
2
Input
A
B
NOTE: Switch S206 is only present on modules equipped with
Sends.