
REVISION C
BMX SERIES III CONSOLE
40
PACIFIC RESEARCH & ENGINEERING
1 2 3 4 5 6 7 8
OPEN
1 2
O
N
ON
ON
C1
C2
1
2
S7, Logic Assignment Selector
Function
S206, Logic Assignment Selector
OFF (OPEN): Sends follow module ON/OFF.
ON (CLOSED): Sends always active with PRE-fader
selection.
Function
C1 (Down): Direct Output follows module ON/OFF.
C2 (Up): Direct Output continuous.
S204, Logic Assignment Selector
OFF (OPEN): No SOLO reset function.
ON (CLOSED): SOLO resets with module ON.
Function
#
1
OFF (OPEN): No CUE reset function.
ON (CLOSED): CUE resets with module ON.
2
S205, Logic Assignment Selector
OFF (OPEN): No local cough function.
ON (CLOSED): Local cough function with module ON
button depressed.
Function
S207, Logic Assignment Selector
Function
ON (CLOSED): Assign to Studio-1.
ON (CLOSED): Assign to Studio-2.
ON (CLOSED): Assign to External.
ON (CLOSED): Assign to Control Room.
ON (CLOSED): Assign to Studio-1.
ON (CLOSED): Assign to Studio-2.
ON (CLOSED): Assign to External.
ON (CLOSED): Assign to Control Room.
#
1
2
3
4
5
6
7
8
Input
A
A
A
A
B
B
B
B
2.9 MODULE INTERNAL OPTION SWITCHES
Some BMX III console modules are equipped with PCA-mounted option switches to enable or disable
selected module functions. This section shows the locations of these switches on each PCA as well as
their functions. Included are descriptions of the Microphone Input, Stereo Line Input, Control Room
Monitor, Two-Studio Monitor, Send And Return, Telco Mix, Slate/Talkback/Test Oscillator, Meter
Switcher, and Monaural and Stereo Equalizer Module option switches.
2.9.1 Microphone Input Module Option Switches
The illustration below shows the locations of the Microphone Input Module internal option switches,
and defines their functions.
NOTE: Switch S206 is only present on modules equipped
with Sends.
NOTE: Each input may be assigned to a single location
only. Assigning an input to more than one location will
disable the module ON circuitry.
Switch S7 sets whether the module’s Direct Output follows the ON/OFF status of the module or has
continuous audio output.