Pacific hydrostar 99741 Set Up And Operating Instructions Manual Download

Page: 21 / 23

For technical questions, please call 1-800-444-3353.

SKU 99741

PAGE 21

If the steps above do not solve the problem or if the repairs involved are

too complex, contact a qualified technician.

Shut off the Pressure Washer, release all pressure in a safe

manner, and disconnect it from power and water before adjusting,

cleaning, or repairing the unit.

Pressure washer does not build pressure

check that hose is unbent and

Inlet Screen is free from debris

and deposits.

hOSe IS nOt kInked and

Screen IS clean

hOSe IS kInked

Or Screen IS

clOgged

clean Screen and

straighten hose.

Switch to a shorter

hose, if possible.

air may be getting in the

water supply hose, check

all connections.

all cOnnectIOnS

are tIght

cOnnectIOnS

are lOOSe

retighten

connections.

Internal valves, seals,

or the nozzle may be

worn, contact a qualified

technician.

troubleshooting

(continued)

dry self thoroughly and check the voltage

at the outlet, and press the reset button

on the gFcI power plug (explained under

Controls and Features,

#1 on page 10).

POWer SuPPlY

adequate and reSet

buttOn Set PrOPerlY

POWer SuPPlY

Inadequate

reSet buttOn nOt

Set cOrrectlY

Have a certified

electrician correct

the problem.

Setup the gFcI plug

as explained on

page 10.

If the power switch is in the

On position the thermal

safety Switch may be

tripped. Switch the unit off

and allow the unit to rest for

20-30 minutes and retry.

Pressure Washer will not start

Summary of Contents for 99741
























Search results

Summary of Contents for 99741

Reviews:

Related manuals for 99741

Brands by name

Popular brands

Pacific hydrostar 99741, Set Up And Operating Instructions Manual

Search results

Summary of Contents for 99741

Reviews:

Related manuals for 99741

Brands by name

Popular brands