SKU 95338
PAGE 11
for technical questions, please call 1-800-444-3353;
troubleshooting section at end of manual.
fIgURE E
SPRAy WAnd (31c)
tURbO WAnd (30c)
WAtER gUn (18A)
Insert the Spray Wand (31c) or Turbo Wand (30c) into the Water Gun (18a), and
twist the Wand into the Extension until the Wand locks in place. Pull the Wand to
make certain it is secure. (See Figure E.)
fIgURE f
bRUSH WAnd
(28c)
bRUSH
AdAPtER (29c)
WAtER gUn (18A)
If using the Brush Wand (28c), insert the Brush Wand into the Brush Adapter (29c)
and twist the Wand into the Adapter until the Wand locks in place. Then insert the
Adapter into the Water Gun (18a), and twist the Adapter into the Extension until
the Adapter locks in place. Pull the Wand to make certain it is secure. The Brush
Wand is used to apply detergent at low pressure. (See Figure F.)
OUtlEt
PIPE (47b)
MAlE
QUIck cOUPlER
(3a)
fEMAlE
QUIck
cOUPlER
HEAVy dUty
HOSE
(nOt InclUdEd)
fIgURE g
lEft SIdE VIEW
RIgHt SIdE VIEW
Attach the High Pressure Hose (2c) to the Outlet Pipe (4B) on the left/lower side
of the Pressure Washer. Attach the male part of the Quick Connector Set (3a) to
the right/ lower side of the Pressure Washer. Screw the female part of the Quick
Connector Set onto a heavy duty garden hose (not included). Then, attach the
male part of the Quick Connector Set to the female part of the Quick Connector
Set. (See Figure G.)
3.
4.
5.
