Page 7
For Pump technical questions, please call 1-888-866-5797.
For Engine technical questions, please call 1-800-520-0882.
ITEM 69747
SAFETY
O
PERA
TION
M
AINTENANCE
SETUP
Controls
Water Drain Plug
Intake Port
Discharge Port
Fuel Tank Cap
Throttle
Choke
Muffler
Air Filter
Starter Handle
Oil Dipstick
Engine Switch
Fuel Tank
Priming Cap
Grounding
The Generator must be properly grounded before use. Have the unit grounded
by a qualified electrician if you are not qualified to do so.
To ground the Generator, connect a #6 AWG grounding wire (not included) from the
Grounding Terminal on the Control Panel to a grounding rod (not included) that has been
driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven
copper or brass rod (electrode) which can adequately ground the Generator.
CAUTION:
This generator is not intended to power sensitive electronic equipment without the addition of an
appropriate line conditioner and surge protector (both not included). Sensitive electronic equipment includes,
but is not limited to, audio/video equipment, some television sets, computers, and printers. Sensitive electronic
equipment should be operated on approved inverter type generators or pure sine wave generators.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Note:
Wheel Kit, item # 68531 (sold separately) can be used with this generator.
Summary of Contents for 69747
Page 1: ......
