Pacific Floorcare SCE-20, Parts & Operation Manual

Page: 15 / 43

OPERATIONS
SCE-20 C 9.808-371.0 3-6
Remove electrical cord and literature from
recovery tank. Fill solution tank (see filling
instructions page 3-5).
Adjust brush to proper setting.
Note: For
good operation the brush must skim the
carpet. If circuit breaker trips raise brush to
prevent damage to motor or carpet.
Plug cord into grounded outlet.
Note: Be
sure dome is seated on recovery tank, and
float shut-off is installed correctly.
STEP
1
STEP
2
STEP
3
STEP
4
CORRECT
INCORRECT
1/8in
(3mm)
Turn on brush and vacuum motor switches
("ON"="I"). Turn on solution switch for
continuous spray or set switch to intermittent
to allow use of trigger switches.