Pacific Floorcare SCE-20, Parts & Operation Manual

Page: 11 / 43

CONTROLS/COMPONENT LOCATIONS
SCE-20 C 9.808-371.0
3-2
1.
Main Handle.
Used to pull and maneuver
machine.
2. Handle Adjustment. Used to adjust height of
handle.
3. Electrical Cord.
4. Brush Motor Switch. Turns on brush motor.
5. Solution Switch. Turns on pump. Continuous
position (bottom) activates electro-valve to
dispense solution to floor through jets.
Intermittent position (up) requires operator to
depress 1 of 3 trigger switches to dispense
solution. Center position is off.
6. Vacuum Motor Switch. Turns on vacuum
motor.
7. Brush Motor Circuit Breaker. 6 amp. Breaker
protecting brush motor.
8. Vacuum Motor Circuit Breaker. 15 amp.
Breaker protecting vacuum motor.
9. Recovery Dump Hose. Facilitates draining
dirty cleaning solution.
10. Solution Dump Hose. Facilitates draining
excess cleaning solution from solution tank.
1
3
9
10
2
5
7 6
8
4