Surround Assembly and Installation
1) Lay part A, B and C face down on a fl at non-marring
surface. Fasten together with 1/4" x 1/2" bolts and nuts
provided through holes at points “D” (Fig. #8 and 9).
2) Lift the surround assembly to the upright position and
make sure the front face is fl at and even at the joints.
3) Center assembled surround on the fi rebox and slide
gently into position.(Fig#10)Be careful to align notches
in surround with top. Engage the mounting brackets over
the mounting screws in the casing side and drop down
to lock into position.(Fig.#11)
4) Push the entire appliance back until the surround assembly
is in contact with the fi replace.
Fig. # 8
Fig. # 9
Fig. # 10
Part B
Part A
Part C
Part A
D
D
D
1/4" Nuts
Part C
1/4" x 1/2" Long Bolts
Firebox Top
Fig. # 11
MOUNTING
SCREW
MOUNTING
BRACKET
8
VISTA
INSERT-D
20
051
6
-2
0