36
100000432-50
060718-44
At the rear of the appliance:
11. Disconnect the main gas supply line (Figure 60).
12. Remove the rear screen located on the lower portion of the Mirage by removing its three screws.
13. Disconnect the gas supply line to the gas valve (Figure 62). It is not necesarry to disconnect the pilot gas
line at this time since it will come out with the control panel once it’s removed and can be removed at that
time.
14. Remove connector X10 (comfort fan) from the control module (Figure 63).
15. Remove the four screws located at the top of the control panel as shown in Figure 6454.
16. Remove the single screw located between the power receptical and the control module (Figure 65).
17. The control panel (Figure 66) can now be extracted from the rear of the heater and serviced on a table top.
Main gas
supply line
Figure 60: Removing the main gas supply line.
Figure 61: Rear screen removal.
Pilot line
Gas supply
line
Figure 62: Gas line connections at gas valve.
Comfort fan
connector (X10)
Figure 63: Comfort fan electrical connector.