34
100000432-50
060718-44
Top positioning
screw/post for
right hand panel.
Right hand secur-
ing screw for upper
front panel
Right hand secur-
ing screw for lower
front panel
Bottom
positioning screw/
post for right hand
panel.
Figure 52: Upper attach points
for side and upper panels.
Figure 53:
Lower attach points for
side and lower panels.
Figure 54: Mirage 18 upper and lower front panels.
Figure 55: Lower front
panel and grill.
To remove the upper and lower panels - with the side panels off, remove
the two screws on either side of each of the two panels (Figure 52 and
Figure 53). Be careful to support the upper and lower panels as they
are being removed because each panel has a grill inset within it (Figure
55). These grills are not fastened to the panels and so may fall during
removal.
Installation
Installation of the panels is the reverse of removal. Take note that the
upper panel is shorter than the lower panel (Figure 54). Also note that
the grills of each panel are not pre-attached and therefore are a little
more difficult to align while mounting.
Figure 51: Mirage 18 with right
side panel removed.