11
060718-44
100000432-50
Using the Remote Control Transmitter
Temperature indication Display
With the remote control transmitter in the “OFF” position, press the thermostat
and mode keys at the same time. Look at the LCD screen on the remote control
transmitter to verify that a C or F is visible to the right of the room temperature
display (Figure 4 and Figure 5).
Turn on the Stove
With the stove OFF, press the ON/OFF key on the remote control transmitter.
The remote control transmitter display will show the active icons on the screen.
At the same time the wall switch will activate the stove via the IFC module. A
single “beep” from the IFC module will confi rm reception of the command.
Turn off the Stove
With the stove ON, press the ON/OFF key on the remote control transmitter.
The remote control transmitter LCD display will only show the room temperature
(Figure 4 and Figure 5). At the same time the IFC module will turn off the stove.
A single “beep” from the IFC module confi rms reception of the command.
Manual Bypass of the Remote Control Transmitter
If the batteries of the remote control transmitter are low or depleted, the gas
stove can be turned off manually using ON/OFF switch located on rear of the
gas stove (Figure 20). This will bypass the remote control transmitter.
C
Remote Flame Control
The Profl ame 2 has six (6) fl ame levels (Figure 6).
With the gas stove turned on, and the fl ame level at
maximum height, press the down arrow key once to
reduce the fl ame height by one step until the fl ame is
turned off.
The up arrow key will increase the fl ame height each
time it is pressed. If the up arrow key is pressed while
the gas stove is on but the fl ame is off, the fl ame will
come on in the high position. A single “beep” will
confi rm reception of the command.
Flame level OFF
Flame level 1
Flame level 5
Flame level MAX
Figure 3: Profl ame 2
remote control battery bay.
Figure 4: Display in
Fahrenheit.
Figure 5: Display in
Celsius.
Figure 6: Flame level control.