5056.201-A ESPR.BODYA
29
120315-40
INSTALLER
INFORMATIO
N
Figure 40: Back Panel
Figure 41: Side Panel
Figure 42: Baffle Mounts
Figure 39: Panel Set
Fan removal before fireplace installation.
1. Remove fan panel at the rear side of the fireplace as seen in Figure 38.
2. Disconnect fan electrical wires and remove fan fasteners.
3. Remove fan out of the firebox assembly.
Panel Installation / Removal
Installation/Removal
1. Insert back panel so that it is sitting on ledge at
the back of the firebox as shown in Figure 40.
2. Insert first side panel by inserting the front
edge of the panel into the lip at the front of the
firebox. Then slide the back of the panel until it
reaches the firebox side wall. See Figure 41.
3. Repeat steps 2 for the second side panel.
4. To hold panels in place, install the baffle, from
the burner kit, by resting the back flange on top
of the back panel and use two screws to
secure the front of the baffle to the top of the
firebox, seen in Figure 42.
5. Do panel removal in reverse order.
