23
DPM-RT-2 Operating Manual
The
Calibration
and some
Pin Codes
settings are pin code protected and can only be accessed by DPM-RT-2
technicians at your local service center or distributor. You can edit the
Internal Web Portal
and
Response
Factor
PIN codes.
•
Calibration:
This screen allows the DPM-RT-2 authorised technician to calibrate the unit, using the
side-by-side or a filter-based calibration process.
•
Pin Codes:
This screen allows for the editing of all the pin codes used on the unit. The DPM-RT-2
authorised technician can reset/recover your pin code if it is forgotten.
6.1
Date and Time
The DPM-RT-2 contains a Real Time Clock (RTC) for
time keeping, which allows the unit to retain the time
even when powered off. But the time must be
periodically updated to ensure it does not drift too
much. If the unit is connected to a WiFi network with
an internet connection, then the unit can
automatically synchronize its time with time servers
on the internet using the Network Time Protocol
(NTP). Alternatively,
the unit’s date and t
ime can be
manually updated via this screen.
