47
FINAL CHECK
Never inflate a tire beyond the maximum pressure marked on the tire’s sidewall. Exceeding the recommended pressure
may blow the tire off the rim, which could cause damage to the bicycle and injury to the rider and bystanders.
Tighten both front/rear wheel axle nuts or the quick release mechanism securely. Failure to do this may cause the
front/rear wheel to dislodge from the frame dropouts resulting in serious damage or injury.
•
After all adjustments have been made, shift through every gear several times at varying speeds. This will ensure all your adjustments
are correct and will allow you to pinpoint any trouble areas. If you encounter any problems, refer to the appropriate section of this
instruction manual and make any necessary adjustments.
•
Check the tire pressure and inflate each tube to the recommended psi as indicated on the sidewall of the tire.
•
Check that the kickstand operates smoothly and the kickstand bolt is secured tightly.
•
Finally, examine the bicycle. Make sure all accessories are correctly attached and all quick releases, nuts and bolts have been tightened
securely.
•
Correct maintenance of your bicycle will ensure many years of happy riding. Service your bicycle regularly by referring to the relevant
sections of this manual, OR take it to a professional bicycle shop. Remember: Always wear a helmet and obey all traffic laws.
ASSEMBL
Y
47
