31
ASSEMBL
Y
Dust
cap
3.15
31
PEDALS AND CRANKS
Attachment of an incorrect pedal into a crank arm can strip pedal threads
cause irreparable damage. Check the tightness of your pedals frequently to
ensure they are tightly attached. Failure to do so could result in serious injury.
Attaching Left and Right Pedals
Look for the letters “R” for right and “L” for left, stamped on each pedal spindle. Start
each pedal spindle by hand to avoid stripping the threads. Note that the right hand pedal
attaches to the chainwheel side crank arm with a right-hand (clockwise) thread. The left
pedal attaches to the other crank arm and has a left-hand (counter-clockwise) thread.
Tightening Pedals
Tighten fully with a 15mm pedal wrench (an open ended wrench will not provide
adequate torque and could damage your bike). It is very important that you check the
pedals for correct adjustment and tightness before riding your bicycle. There should be
no threads showing and you must not be able to loosen pedals by hand. Failure to check
pedals frequently could result in serious injury.
