13
SAFETY CHECKLIST
Before every ride, it is important to carry out the following safety checks:
Brakes
•
Ensure front and rear brakes work properly.
•
Ensure brake shoe pads are not overly worn and are correctly positioned in relation to the rims.
•
Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.
•
Ensure brake control levers are lubricated and tightly secured to the handlebar.
Wheels and Tires
•
Ensure tires are inflated to within the recommended pressure as displayed on the tire sidewall.
•
Ensure tires have tread and have no bulges or excessive wear.
•
Ensure rims run true and have no obvious wobbles or kinks.
•
Ensure all wheel spokes are tight and not broken.
•
Check that axle nuts are tight. If your bicycle is fitted with quick release axles,
make sure locking levers are correctly tensioned and in the fully closed position.
Steering
•
Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering.
•
Ensure that the handlebars are set correctly in relation to the forks and the direction of travel.
•
Check that the headset locking mechanism is properly adjusted and tightened.
•
If the bicycle is fitted with handlebar end extensions, ensure they are properly positioned and tightened.
Chain
•
Ensure chain is oiled, clean and runs smoothly.
•
Extra maintenance is required in wet or dusty conditions.
BEF
ORE Y
OU RIDE
13
