background image

20

XDL Rover 2 User Guide

Battery

Battery care

The XDL ROVER 2 has an internal power supply that allows all-day operation without 

taking power from the GNSS receiver. The light-weight Lithium-ion single-cell battery can 

be recharged more than 1,000 times, providing 3+ years of normal use.
For best battery life and performance always recharge the battery after every use. If the XDL 

ROVER 2 is stored, you must recharge the battery every 3 - 6 months. 

WARNING

 

– The internal Lithium-Ion battery is NOT USER SERVICEABLE. Do not attempt 

to open the enclosure or replace the battery. Lithium-ion batteries can be dangerous if 
mishandled. All warranty will be void if the XDL ROVER 2 is opened by anyone except 
authorized service personnel. 

Charging the Internal Battery

It is important to recharge the battery after every use, or every 3 months during periods of 

non-use. 
The XDL ROVER 2 has built-in circuitry that monitors and controls the charging of 

the internal battery. The internal battery quickly charges in less than 4 hours with the 

supplied charger. We recommend charging the internal battery at room temperature. 
Charging is inhibited if the ambient temperature is below 0 °C or above 25 °C.
•  To charge the XDL ROVER 2 use the provided charger (C03155) and cable  

(P/N 100948-00).

•  The XDL ROVER 2 can also charge its internal battery from any data cable that 

provides power to the radio.

•  The green LED will begin to blink once every two seconds to indicate that the unit 

is charging its internal battery.

•  The XDL ROVER 2 will continue to operate while charging.
Note:  The XDL ROVER 2 is designed to ignore external power inputs that are less than 11 

VDC. If the unit is connected to a system running from a 12 VDC external battery pack, 

when the voltage drops below 11 VDC, the XDL ROVER 2 will switch to its internal battery. 

This allows the overall system to last longer as XDL ROVER 2 is now operating from its own 

internal battery. 

CAUTION – The internal battery must not be subject to operating temperatures below -20 °C. 
Subjecting the battery to conditions below -20 °C will produce permanent battery damage, 
and is not covered by the warranty.

C

C

Summary of Contents for XDL ROVER 2

























Reviews: