Part 3 - Configuration
56
Ř
Time Out
: Once
Time Out
has been enabled, the
system will assume the end of a transaction if no
new string is entered within the specified duration of
time. Select between 5 secs and 15 mins.
Selecting RS232, RS485, USB-Serial 1 through 8, or
LAN 1 through 16 as the port activates the Port Setup
button. Select
Setup
and configure the
Baud Rate
,
Data Bit
,
Stop Bit
, and
Parity
settings.
Ř
If any one of LAN1 through 16 has been selected
as the port, select the Port Setup button and
configure the network port setting.
Ř
If using a USB-serial port, the Text-In feature may
malfunction if the USB cable is removed while the
system is in operation.
Ř
Title
: Designate a name for the text-in device.
Ř
Actions
: Specify which actions to take when text-in
is detected.
-
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the
schedule is set to Event or Time & Event mode,
the selected cameras will begin linked recording
when an event occurs.
-
Alarm-Out
: Designate event-triggered alarm-out
channels and beeps.
-
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, SNS, and/or Alert Window.
-
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
In order to use the Callback feature, the NVR must
be registered on the remote program.
Device Setup
Refer to the
Menu Use on page 35
for basic
information on using the Setup menus.
Alarm-Out
Select the + icon at the bottom left corner of the
screen to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select
icon to delete the schedule.
Ř
Dwell Time
: Select a value between 5 secs and 15
mins as the alarm-out duration.
Ř
Title
: Designate a name for the alarm-out.
Ř
Range
: Change the schedule time frame.
Ř
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
Ř
Channels
: Configure alarm-out port and beep
settings.