Pacific Communications S84504 User Manual Download Page 34

Page: 34 / 88

Part 2 - Getting Started

Audio Recording

If the Record Audio option under

Record Setup

General

has been enabled the camera will record

audio along with video. For more information, refer to
the

Audio on page 47, Record Setup on page

Check your local laws and regulations on making

audio recordings.

Video Recording Playback

You can play back video recordings by using mouse
or remote control.

is needed to playback video recordings.

The initial video playback point in Search mode is

the recording's last playback point or the end of

the recording data.

Audio playback of the selected recording is

available in full screen mode only.

Covert protection on cameras also applies to

video recording playback.

All Channel Playback

Press the

button while in Live mode.

Select the Search Mode

icon and then select

Time-Lapse Search

Event Log Search

The selected search mode will be initiated.

For more information on data search, refer to the

Search on page 65

Remote Control Buttons during
Playback

Camera Button

: Displays the selected recording

in full screen.

Zoom Button

: Allows you to zoom in on a

speciﬁc area of the recording.

Layout Button

: Cycle through single screen, 2x2,

3x3, 4x4, 5x5, and 6x6 modes.

Context Menu

While in Search mode, press the remote control's

button and then the

button to display the

Context Menu window. Alternatively, right-click on the
mouse to access the Context Menu.

Zoom

: Zoom in.

Audio

: Enable/disable audio. (This function

supports only in single screen.)

Edit Group

: Rearrange the split screen layout.

Summary of Contents for S84504

























































































Search results

Summary of Contents for S84504

Reviews:

Pacific Communications S84504, User Manual, Page: 34 / 88

Search results

Summary of Contents for S84504

Reviews: