24
WARNING: A wheelchair's seatlock IS NOT designed to hold the seat while you push off
one side to assist yourself in standing! You risk injury if the seat is used in the wrong way!
Do not attempt to overtighten the seat lock. If it does not hold under its intended use while
you are riding the wheelchair, see the section regarding adjustment later in this manual, or
contact your dealer immediately!
Seat Height Adjustment
The seat assembly is height adjustable.
1. Remove the seat assembly by unlocking
the seat lock and lifting the seat assembly
straight up. Set aside.
2. Locate the seat height adjustment bolt
and nut located at the base of the chrome
seat post.
It is recommended that the seat assembly be positioned at the lowest comfortable seat height.
PaceSaver Scout "M"-series's stability will be improved with a lower height.
Some models have a height adjustment, see your dealer for details.
Footplate Adjustment
Length
To move the footplate in or out, remove the clevis pin which holds it in place and reinsert at
another hole.
Angle
Loosen the lock nuts on the two bolt on the underside of the footplate tube. You may then
adjust the bolts in or out (equally for each) to adjust the angle of the footplate you desire.
When you have it properly set, retighten the locknuts.
3. Remove the bolt, nut, and small metal cones. Take
note of their position in order to correctly replace them.
4. The chrome seat post will now move up and down.
5. Position the chrome post to new desired position.
6. Replace the metal cones, bolt, and nut in their
proper order. Tighten until all play is eliminated.
7. Replace the seat assembly and test the new height.
