16
Pairing your RF remote control with your set-top box
If you are using an RF remote control, you must pair it with your set-top box, before you can use your set-top box
with your TV.
1. Put the two AA batteries provided into your remote control.
2. Turn on your TV and set-top box.
3. Press and hold the two buttons (the
Select
buttons, see page 17) on the front of your set-top box. You’ll see a
message on your TV showing you that your set-top box is trying to pair with a remote control. Your TV shows
you which two buttons to press on your remote control.
4. Press and hold the two buttons on your remote control, as instructed on your TV screen. You’ll see a message
on your TV confirming that your remote control has been paired with your set-top box.
NOTE
If you don’t complete the process within two minutes, you’ll have to start again. Pressing
EXIT
on your remote
control also ends the pairing process
.
CONNECTING THE EQUIPMENT (cont.)
NOTES
Your cable TV service-provider
determines the digital channels,
services, and screen information
that you see on your TV when you
use your set-top box and its remote
control.
Consult the information supplied
by your cable service-provider for
details on how to make the most of
the digital cable services. Also read
the operating instructions that are
supplied with your remote control.
