9
REAR PANEL (cont.)
Cable In
Connect the cable service here.
To TV
Connect to the RF/antenna input on your TV or VCR (optional).
CableCARD module
Removal will interrupt your service.
Audio Out
Connect to the L and R audio inputs on your stereo TV, stereo VCR, or optional stereo amplifier.
Component Video
If your HDTV does not have an
HDMI
TM
connector, connect your HDTV here.
SD Card
For future use during servicing of your set-top box.
USB
Connect to compatible optional equipment that supports a USB 2.0 interface.
+15V Power
Connect your set-top box’s power supply unit here.
Make this connection last of all
.
Ethernet
Connect your set-top box into an Ethernet home network (optional).
HDMI In 1 and HDMI In 2
Connect another optional
HDMI
TM
devices (allowing the devices’ outputs to loop through the set-top box to the TV).
Composite Video
Connect to the composite video input on your VCR (or a standard TV).
HDMI Out
If your HDTV has an
HDMI
TM
connector, connect it here for a
digital
audio/video connection (instead of using the audio
and three
analog
component video connectors).
Digital Audio
Connect to the
optical
digital audio input on optional digital audio equipment, such as an audio decoder or home theater
receiver.
eSATA
Connect an optional external hard disk.
