56
If the installed system does not seem to be working properly, first make sure that all the cables are securely connected, then carry out the
following checks, in the order shown.
Check
Suggested solution
Further checks, if there is still a problem
Is anything lighted on the
set-top’s front panel?
YES
D
NO
R
Power may not be reaching the set-top. Make
sure that the power cord is properly plugged
in. If there is a switch by the wall AC power
outlet, switch it to ON.
Check that the wall AC power outlet is working (for
example by plugging in a lamp).
Does the remote control
operate the set-top?
YES
D
Please see the next page
NO
R
The set-top may not be turned on.
Check if the light around the
POWER
button on the front panel is green. If it is red,
press the
POWER
button on the front panel
to turn on the set-top.
Check that nothing is blocking the path from the remote
control to the front panel.
Check that the remote control is currently set to operate
the set-top (consult the instructions supplied with the
remote control).
If the remote control will still not operate the set-top,
replace the batteries in the remote control.
If there is still a problem, try to operate the set-top
by using its front-panel buttons. If this works, then the
remote control may be faulty.
SOLVING PROBLEMS
