23
CONNECTING THE EQUIPMENT (cont.)
About Setup D: Adding a home theater receiver to Setup C
All of the points mentioned in Setup C apply.
To enhance the sound, connect a home theater receiver.
•
There is an S/PDIF output labeled DIGITAL AUDIO OUT OPTICAL, which is shown connected by cable 8 in the diagram on
•
page 22.
When you add a home theater receiver, the set-top’s audio connection to the HDTV (via HDMI
•
TM
) is not needed, so you may wish
to mute (turn off) the audio on the HDTV.
Instead of the VCR’s audio L and R outputs going to the HDTV, they connect via cables 7 to the home theater receiver.
•
A
&
S
-V
RF Cable TV
HDMI or [DVI & Audio]
Home
Theater
HDTV
Cable TV
RF
Cable Wiring Diagram D
Digital Audio
S-Video
Stereo Audio
VHS
Recorder
DC700X
set-top
NOTE
The diagram shows a video path from
the set-top to a VCR to allow recording
to the VCR. It shows a video path from
the VCR to the TV to allow playback of
videos. Video signals fed through a VCR
may be affected by copyright protection
systems, which can cause picture
distortion on the TV.
Do not therefore use a path through a
VCR to watch the set-top programs. Use
the HDMI
TM
path or an alternate
direct
video path from the set-top to the TV.
Remember to select the correct input on
the TV.
