38
OPERATING THE SET-TOP (cont.)
NOTE
Regardless of the program channel number selected on the set-top, the RF output channel number will always be fixed (either 3 or 4, as quoted by
the cable operator). The TV and VCR must be tuned to this channel if you want to watch and record programs through the RF coaxial cables.
Using the remote control
The cable TV service-provider determines the digital channels, services and screen information that you see on the TV when you use the
set-top and its remote control.
Consult the information supplied by the cable service-provider for details on how to make the most of the digital cable services. Also read
the operating instructions that are supplied with the remote control.
Lightning storms
Disconnect the set-top’s power cord during lightning storms. A lightning storm may affect the set-top, if it is on during the storm. It may
appear that it has stopped working, but you can easily restore its operation as follows.
Unplug the set-top’s power cord at the wall AC outlet. Then plug this power cord in again at the wall AC outlet (and, if there is a switch by
this outlet, switch it to its ON position).
