Use of this Manual
This manual will provide the user with the basic knowledge to properly operate and maintain the PACE
Arm-Evac 250 Fume Extraction System. If you encounter any difficulty operating your system or have any
questions, call your local authorized PACE dealer or contact PACE Applications Engineering directly at the
United Kingdom Office at:
Tel. (44) 01908 277666, Fax (44) 01908 277777, or PACE Product Management at the U.S. Office at:
Tel: (301) 490-9860, Fax (301 604-8782
WARNING
Read the safety & set-up information sections in this manual thoroughly
before installing and using
your fume extraction system.
Introduction
Solder Fume removal when hand soldering is an often-overlooked work place hazard. Medical
research has confirmed that there is an increase incidence of occupational asthma, chronic bronchitis,
allergic reactions and other health related effects associated with exposure to solder/flux fumes in the
electronics industry.
The PACE Arm-Evac 250 Central Filter Unit represents the latest technology in affordable fume extraction.
It features a heavy-duty, maintenance-free brushless motor along with a filtration process which
includes a pre-filter for course particle removal, and a High Efficiency Particulate Arrestor (HEPA)/Gas
Filter cartridge. The HEPA/Gas Filter is ideal for applications where high efficiency particulate removal is
required with the additional benefit of a gas media blend to neutralize and adsorb noxious gases.
Optional filters are also available:
Environmental Specifications
Ambient operating temperature
0ºC to 50º (32ºF to 122ºF)
Storage temperature
-40ºC to 125ºC (-40ºF to 257ºF)
Ambient operating humidity
90% relative humidity max non-
condensing
Storage humidity
90% relative humidity max non-
condensing
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
