Paccar Kenworth T170 Hybrid 2011, Builder'S Manual

Page: 176 / 179

Appendix A
Vehicle Identification
A-2
12/11
VEHICLE IDENTIFICATION LABELS
Vehicle Identification Labels are located on the driver’s side door edge or on either the driver’s or passenger’s side door
frames. See Figure A-2. Labels include Vehicle Certification, Components and Weights, Tire/Rim and Weight Rating
Data, Noise Emissions, and Paint Identification. Quantity and location of labels may differ based on Complete/Incomplete
vehicle, and Single/Dual certification.
Labels:
Tire, Rim & Weight Rating,
Certification,
Major Components &
Weights,
Paint,
Canadian Safety Mark -
(Canadian registry only),
U .S . EPA Noise,
Patent, and others .
Note: Final Stage
Manufacturer Label to be
installed by Final Stage
Manufacturer on driver’s
door edge or driver’s door
frame .
Chassis Serial
Number
FIGURE A-2. Drivers Door and Door Frame Labels
Tire/Rim and Weight Rating Data Label
The Tire/Rim and Weight Rating Data Label is used in conjunction with the Incomplete Vehicle Certification Label on
Incomplete Vehicles . It contains chassis serial number and the following information:
• GVWR — Gross Vehicle Weight Rating
• GAWR FRONT and REAR — Gross Axle Weight Ratings for Front and Rear Axle
• TIRE/RIM SIZES AND INFLATION PRESSURES — Tire/Rim Sizes and Cold Pressure Minimums
GVWR is the TOTAL WEIGHT the vehicle is designed to carry. This includes the weight
of the empty vehicle, loading platform, occupants, fuel, and
any load.
Incomplete Vehicle Certification Label
The Incomplete Vehicle Certification Label contains the chassis VIN, date of manufacture, and listing of applicable motor
vehicle safety standards.
Components and Weights Label
The Major Components and Weights Label includes chassis weight and gross weight information, as well as model and
serial numbers for the vehicle, engine, transmission, and axles.
Note: