Paccar Kenworth T170 Hybrid 2011, Builder'S Manual

Page: 158 / 179

Section 8
Electrical
8-30
12/11
INSTALLING A THIRD BATTERY (NOT AVAILABLE ON HYBRID)
A third battery is a published option and can be ordered with your vehicle. If this was not done, use Figure 8-25 and 8-26
as guides for installing a third battery .
You will need the following additional parts to install the third battery:
TABLE 8-9.
Third Battery Installation Parts for Parallel Battery Box LH Under Cab
Item T170 qty T270/370 qty Part Number Description
1 1 1 P27-6100-111 Battery - GRP 31 w/Threaded Posts
2 1 1 K396-1010-008 Jumper Cable, Positive
3 1 1 K395-1020-008 Jumper Cable, Negative
4 0 1 N63-1002 Battery Pad
5 0 2 N20-1025 Battery Retainer, lower
6(1) 0 4 W34-1070-060 Bolt - Hex M8 x 60
7(1) 0 4 K169-162-8CA Nut - Hex Metric
8(1) 0 8 K363-338-2-312 Washer - Flat
9 0 1 N20-1001 Battery Retainer, Upper
10 1 0 15-05609 Battery Hold - Down
11 1 0 15-05719 Battery Hold - Down Hook
12 1 0 27-00791-005 Locknut
13 1 0 27-00428-005 Washer - Flat 5/16
14 0 1 K041-804-275CA Bolt - Hex M10 x 275
15 0 1 K363-3 Washer - Cupped
16 0 1 4023 Button
17(2) 1 1 K396-1710-008 Jumper Cable, Positive
18 1 1 K333-46-18 Ring Terminal, 1/4”
Note: (1) For T270/370 with hydraulic brakes use these to install both item 5, otherwise use the existing fasteners .
(2) Use this in place of item 2 when liftgate wiring is required .
FIGURE 8-24.
Adding a Third Battery