PAC MMC200, Operating Manual

Page: 2 / 16

MODEL MMC200
MULTI-MATERIAL CUTTER
MMC200 SPECIFICATIONS
Maximum cut length.............99,999" (or 99,999 cm)
@ +/- 1% accuracy
Minimum cut length.............. 0.100" (.25cm) or less
@ +/- 0.02"(.05cm) accuracy
Maximum material size:
Tubing.......................0.625" (5/8") OD (ø1.58 cm)
Flat Material...............................3.94" (10 cm) wide
Wire......................10 AWG (.040cm) solid copper
Tolerance........................................... 1% or better
(dependent on material and feeding system)
Batching…………up to 99 programmable batches
Power Requirements
Electrical ………....….. .115Vac or 230Vac (+/-10%)
Consumption ……………………………...… 200W
Compressed air ………………...…….. 40 to 90PSI
Feed rates……………....10 selectable feed rates
Ordering Information
AR7161...................................................115V 60Hz
AR7162.................220/240V, 50Hz, European plug
Optional Accessories
AR3801 (DE400)....................... Vertical Dereeler
AR0170 (DE700).................Compensatting dereeler
AR6201 (APF100)..............................Prefeeder(115V)
AR6202 (APF100)..............................Prefeeder(230V)
TR1413............................High speed steel lower blade
TR1415............................High speed steel upper
blade
Replacement Parts
IR1205...........Replacement guillotine(upper) blade
IR1203.................Replacement anvil (lower) blade
PR0655...........................................4A fuse (115V)
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING: DO NOT OPERATE TOOL UNTIL
YOU HAVE READ THOROUGHLY, AND UNDER-
STAND COMPLETELY, ALL INSTRUCTIONS,
RULES, ETC. ON THIS PAGE, AND IN THE
OPERATING MANUAL. WHEN USING ELEC-
TRIC TOOLS, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO RE-
DUCE RISK OF FIRE, ELECTRIC SHOCK, AND
PERSONAL INJURY, INCLUDING THE FOL-
LOWING:
GROUNDING INSTRUCTIONS
In the event of a malfunction or breakdown, ground-
ing provides a path of least resistance for electric
current to reduce the risk of electric shock. This
tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Feedrate # inches/sec cm/sec
0 6.6 16.8
1 9.9 25.2
2 13.2 33.6
3 16.6 42.1
4 19.9 50.5
5 26.5 67.3
6 29.8 75.7
7 33.1 84.1
8 36.4 92.5
9 39.7 100.9
MMC200 Feed belt speeds
Feedrate # / Length 1" 2" 6" 10" 20" 100"
0 5,792 4,129 2,009 1,327 718 154
1 6,058 4,411 2,571 1,935 1,196 295
2 6,963 5,354 3,363 2,613 1,679 435
3 8,042 6,495 4,359 3,410 2,207 578
4 8,366 6,843 4,689 3,781 2,549 707
5 8,533 7,024 4,858 3,992 2,801 827
6 8,731 7,240 5,062 4,192 3,032 943
7 8,822 7,339 5,157 4,279 3,180 1,049
8 8,822 7,339 5,157 4,279 3,237 1,140
9 8,822 7,339 5,157 4,279 3,251 1,183
Production rates (in pieces per hour) at various feedrates
Production Automation • Eden Prairie, MN USA • Ph: 888-903-0333 • info@gotopac.com • www.gotopac.com • Fax 952-903-0315