25
•
The motor component, power adapter and charging base cannot be cleaned and
disinfected
with automatic equipment. Manual cleaning and disinfection is required.
•
Do not sterilize the motor component, power adapter and charging base.
6.3.1 Pre-Op processing
Before each use, the motor component, power adapter and charging base must be cleaned and
disinfected. The specific steps are as follows:
6.3.1.1 Manual cleaning steps:
1.
Take out the motor component, power adapter and charging base on the workbench.
2.
Wet the soft cloth completely with distilled water or deionized water, and then wipe all the
surfaces of the components such as the motor component, power adapter and charging
base, etc.
u
ntil the surface of the component is not stained.
3.
Wipe the surface of the component with a dry
,
soft nap-free cloth.
4.
Repeat the above steps at least 3 times.
Note:
Use distilled water or deionized water for cleaning at room temperature.
