12
•
This device requires special precautions regarding electromagnetic compatibility (EMC) and
must
be in strict accordance with the EMC information for installation and use. Do not use
this equipment near fluorescent lamps, radio transmitting devices, remote control devices,
handheld and mobile high-frequency communication devices.
•
Long term use of equipment may result in overheat
ing
of motor handpiece, thus it should be
left to
cool for next use. If the motor handpiece is overheated frequently, please contact
Pac-Dent
.
•
Use the original charging base.
•
Do not make any changes to the device. Any changes may violate safety regulations, causing
harm
to the patients. The manufacturer will not accept any liability for the modified device.
•
Use original power adapter.
A different
power adapter will result in damage to lithium battery
and
control circuit.
•
The component, charging base, power adapter, and foot control cannot be autoclaved. Use
a
disinfectant of neutral pH value or ethyl alcohol to wipe its surface.
•
Before the motor component stop
s
rotating, do not install or remove the outer sheath.
•
Before the motor component stop
s
rotating, do not remove the disposable prophy angle.
•
Before starting the handpiece, please ensure that the disposable prophy angle was correctly
installed and locked.
•
Use a disposable prophy angle fitting the interface of this device.
