Page
8
of
13
Copyright © 2015 P2 Mobile Technologies Limited. All rights reserved.
WIRELESS ACCESS POINT USER MANUAL
SmartMoment—Configuring the AP
The Z500 comes with the built-in SmartMoment (Lightweight Mode) for basic configuration of the AP. To
configure the AP, connect it through wireless or wired method.
Purpose
The lightweight mode allows you to:
Set up a basic network with just three steps
Configure IP address, netmask, DNS, SSID and password
Have a quick overview of AP and client device
Connection Procedure
Wireless Method
1.
Power up the AP.
2.
Use a Wi-Fi-enabled device to connect to the SSID “P2MTWifi” with password “p2mtuser”.
3.
Open the browser and type the IP address “172.16.0.1”.
4.
Navigate to the top menu bar and click
Lightweight
under
Mode
.
Wired Method
1.
Power up the AP.
2.
Connect the AP and the PC with a LAN cable.
3.
Set the IP of the PC to “192.168.1.2”.
4.
Navigate to SmartMoment by “192.168.1.1”.
5.
Navigate to the top menu bar and click
Lightweight
under
Mode
.
Default Login Information
Username: p2mtadmin
Password: p2mtadmin
Note
SmartMoment Lightweight mode is for basic configuration
ONLY
. Use the advance mode for advanced
setting. For details, please refer to the SmartMoment User Guide.
