Page
6
of
13
Copyright © 2015 P2 Mobile Technologies Limited. All rights reserved.
WIRELESS ACCESS POINT USER MANUAL
Installation Procedure
Installation Environment
Operating ambient temperature: -40°C-65°C
Operating ambient humidity: 5%-95% non-condensing
Pole Mounting Procedure (Pole Size: Ø40-52mm)
1.
Firstly install the L-shaped clamp, with M6 screw nut, spring washer and flat washer. Four
screws need be installed.
2.
Put the U-shaped screw stem and U-shaped slot into the hole. And then drive the M6 crew nut
and M6 washer.
3.
Install the clamp on the back of the AP, with M6*12 screw bolt, M6 spring washer and M6 flat
washer. Four screw bolts need be installed.
4.
Input M6*12 screw bolt and M6 washer into the hole on the back and drive them.
