P+S Technik Weisscam HS-1, Operator'S Manual

Page: 43 / 66

PREVIEW and SAVING >> G|3
OPERATOR‘S GUIDE BOOK
4.
Deactivate
Save all images
->
If you forget to deactivate
Save all images
, the Control
Unit will save all images and that will (depending on the used
color algorithm) take a very long time. You can stop the down
loading by pressing
ESC
and save it again with the right Cut in
and Cut out.
5.
Write in
first image
and
last image
from your list.
->
Double-check the
first
and
last image
. If the first image
of the new sequence is bigger than the last image of the old se-
quence, the Control Unit takes a minimum and this can become
a very long sequence. If you have the feeling, the download
time is to long, this might be the reason.
6. Carefully choose the file type. 8 bit-tiff uncompressed gives you the
best quality. You may prefer avi files with uncompressed full frames,
but you have to check this with your customer in advance. Do not
save MPEG files, because it takes additional download time.
->
Do not use the 16 bit FITS or the 16 bit ASCII or other
formats, the post production cannot read them!
These are internal formats
.
7. Press the
SAVE
button.
8. Press the
YES
button, because you are saving 8 bit data.
9. Now the download starts. You can see the progress in the status
line (bottom left)
10. After the download process finished, the downloaded sequence
is on your hard disk. You can either download a second part of the se-
quence in the camera’s RAM or press the red record button and record
a new sequence.
->
After you pressed the red record button, all data in the RAM
of the Camera will be erased.