10
MAN 9065578 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
De-soldering braid
•
Place the de-soldering braid across the surface of the metal of the joint to be
de-soldered and heat it with the soldering iron tip (9). The melted metal is
drawn up the de-soldering braid.
Solder sucker
•
Heat up the surface of the solder joint using the soldering iron tip. Once the
solder has melted activate the pump, which will suck the melted metal up.
Interruption or stopping the work
The soldering iron must be placed in the soldering iron holder (11) when not in use.
•
Switch off the soldering iron by setting the ON/OFF button (3) to [0] and place
the soldering iron in the soldering iron holder so that it can cool down.
•
Remove the plug from the main power outlet socket if taking a longer break
from the work.
•
The soldering station must have completely cooled down before it can be
placed in storage.
Standby mode
The soldering station will enter stand-by mode after 30 minutes of inactivity. When in
stand-by mode the display will show [200
o
C] and will flash.
Pressing any button will interrupt the stand-by mode.
