P.Lindberg 9058906, Original Manual

Page: 94 / 97

28
MAN 9058906 EN V2
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 70212626 6600 Vejen, Denmark E-mail: salg@p-lindberg.dk
Maintenance
Maintenance schedule
First time Daily Every 150 hours
or monthly Every 1200
hours or
annually
Safety
labels Check
condition Check condition Check condition Check condition
Levers Check that they
automatically
glide back Check that they
automatically
glide back Check that they
automatically
glide back Check that they
automatically
glide back
Hoses Check for leaks Check for leaks Check for leaks Check for leaks
Engine oil tank Check level Check level Check level Check level
Oil filter*
Hydraulic oil tank Check level Check level Check level Check level
Pins Check that they
are correctly in
place Check that they
are correctly in
place Check that they
are correctly in
place Check that they
are correctly in
place
Screws, nuts,
bolts Check that they
are sufficiently
tight Check that they
are sufficiently
tight Check that they
are sufficiently
tight Check that they
are sufficiently
tight
Lubrication Lubricate Lubricate Lubricate Lubricate
*See section relating to this.
Oil level, replacement of oil and oil filter
When filling or replacing the oil, hydraulic oil type HVI 46 should only be used. Tank
capacity is 23 l. Always follow the recommendations in the maintenance schedule.
1. Procedure to check the oil level:
a) Position the machine on a flat surface.
b) If the level is too low, unscrew the cap and fill with recommended oil. Always
use only fresh oil.
c) Replace the cap after filling.
2. Procedure to drain the oil and replace the oil filter:
a) Place a suitable container under the tank.
b) Loosen one of the two hoses to drain the hydraulic oil.