6
MAN 9044430 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: 70212626
DK-6600 Vejen
e-mail: [email protected]
Instructions for use
First fit the correct cutting jaws into the cutter head.
The trays are labelled ½" - 3/4" or 1"-2"
This is printed on the end of the cutting tray.
To be able to change cutting trays, it is necessary to
to loosen the locking handle.
The locking handle must be loosened enough to push the bolt
so much through that the pin protrudes completely outside the
guide groove.
When mounting the cutting trays, the line on the cutting tray
must align with the edge of the cutting head.
Must align here.
Locking
handles
Tap
The line aligns here
