P.I.T. PWC125-C, Operation Manual

Page: 8 / 29

Wall Chaser
7
cut gas or water pipes, electrical wiring or
objects that can cause kickback.
Additional safety warnings
Wear safety goggles.
► Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by your
hand or against the body leaves it unstable
and may lead to loss of control.
► Wear hearing protection, safety gog-
gles, dust mask and gloves. As dust
mask, use at least a particle filtering
half mask of fi lter class FFP2.
►
Use suitable detectors to determine if
utility lines are hidden in the work area
or call the local utility company for as-
sistance. Contact with electric lines can
lead to fi re and electric shock. Damaging a
gas line can lead to explosion. Penetrating
a water line causes property damage or
may cause an electric shock.
► Do not touch the cutting disc after
working before it has cooled. The cut-
ting disc becomes very hot while working.
► When working with the machine, always
hold it fi rmly with both hands and pro-
vide for a secure stance. The power tool
is guided more secure with both hands.
Product Description and Specifi-
cations
Read all the safety and general in-
structions.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or seri-
ous injury.
While reading the operating instructions, un-
fold the graphics page for the machine and
leave it open.
Intended use
In conjunction with a dust categoryM vacuum
cleaner and with firm support of the cutting
guide, the machine is intended to cut or slot
mainly mineral materials such as reinforced
concrete, brickwork and road surfaces without
the use of water.
Product Features
The numbering of the product features refers
to the diagram of the power tool on the graph-
ics page.
(1) Spindle lock button
(2) Cutting-depth scale
(3) Clamping lever for depth stop adjustment
(4) Anti-lock button
(5) On/Off switch
(6) Protection guard with cutting guide
(7) Clamping nut
(8) Two pin spanner for clamping nut
(9) Diamond cutting disc
(10) Vacuum connection
(11) Locking screw for auxiliary-handle holder
(12) Auxiliary-handle holder
(13) Auxiliary handle
(14) Chaser rollers
(15) Carbone brush cover
(16) Mounting fl ange
(17) Spacer discs
(18) Grinder spindle
(19) Allen wrench
(20) Clamping nut
Technical Data
Model PWC125-C
Rated voltage 220 V~ / 50 Hz
Power 1400 W
Rated speed 9000 r/min
Spindle thread M14
Weight 3.75 kg
Disc diameter 125 mm
Slitting depth 0-30 mm
Slitting width 3-30 mm
Contents of delivery
Wall chaser 1 pc
Protective cover 1 pc
Additional handle 1 pc
Clamping lever 1 pc
Suction pipe 1 pc
Clamping wrench 1 pc
Hex key 1 pc
Nozzle fi xing ring 1 pc
Note
Since the product is constantly being im-
proved, P.I.T. reserves the right to make
changes to the specifications and product
specifi cations specifi ed here without prior no-
tice.
Assembly
► Before any work on the machine itself,
pull the mains plug.
Dust Extraction
► Dusts from materials such as lead-contain-
ing coatings, some wood types, minerals
and metal can be harmful to one’s health.
Touching or breathing in the dusts can
cause allergic reactions and/or lead to re-
spiratory infections of the user or bystand-