P.I.T. PBH32-C5, Operation Manual

Page: 8 / 20

Electric Hammer Drill
8
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
1. In the absence of any valid legal docu-
ments (invoices) such as warranty certificates
and warranty cards to prove the date of pur-
chase.
2. Damage caused by natural wear and over-
load. (For example, motor rotor and stator fail-
ure caused by overload, scorching or melting
of the primary winding of the welding machine
transformer, charging or starting the charging
device, melting of internal parts, burning of
electronic circuit boards, etc.)
3. The casing and power cord are mechani-
cally damaged, as well as damage caused by
corrosive media and high and low tempera-
ture, foreign objects entering the ventilation
network of the motor, and damage caused by
improper storage (corrosion of metal parts);
4. Damage caused by improper carrying,
transportation and storage by users.
5. Products that are opened, repaired, re
-
placed or modified by users themselves.
6. Any damage caused by indiscriminate use,
beyond the scope of use of the tool, and not
in accordance with the instructions for use
and maintenance. (see chapter “Safety Pre-
cautions” in the manual);
7. The damage caused by the following situ-
ations is not guaranteed due to improper use
and non-quality problems:
(1) When the power tool is running at high
speed, use the braking device to forcibly stop
the rotation.
(2) Excessive pressure is applied to the tool
during the use of the tool.
(3) Use the tool outside the scope of its pur-
pose and capabilities.
(4) Damage caused by the tool working in
a dusty environment for a long time without
timely maintenance of the tool.
(5) Change the rotation direction of the work
head before the tool stops completely.
(6) Shock the battery or charger and replace
the plug of the charger without permission,
causing damage to the battery or charger.
(7) Damage caused by two-stroke gasoline
tools not being fueled in the correct propor-
tions.
The warranty does not include:
1. Replacement of accessories (accessories
and components) such as batteries, discs,
blades, drills, drills, chucks, chains, sprockets,
collet clamps, guide rails, tension and fasten-
ing elements, dresser heads, grinders And
belt sander base machine, hexagonal head,
etc.;
2. Wearing parts, such as: carbon brushes,
transmission belts, seals, protective covers,
guide rollers, guide rails, rubber seals, bear-
ings, toothed belts and wheels, shanks, brake
belts, starter ratchets and ropes, piston rings
Wait.
The above accessories are replaced with paid
services during the warranty period;