P.I.T. PBH32-C5, Operation Manual

Page: 7 / 20

Electric Hammer Drill
7
release button and turn the drilling/hammer
drilling selector switch to the desired position
until it can be heard to latch.
Position for hammer drilling in
concrete or stone
Position for drilling without im-
pact in wood, metal, ceramic and
plastic as well as for screwdriving
Vario-Lock position for adjust-
ment of the chiselling position The
mode selector switch does not
latch in this position.
Position for chiselling
Switching On and Off
-
To start the machine, press the On/Off
switch and keep it pressed.
-
To switch off the machine, release the On/
Off switch.
For low temperatures, the machine reaches
the full hammer/ impact capacity only after a
certain time.
This start-up time can be shortened by strik-
ing the inserted tool insert against the floor
one time.
Safety Clutch
►
If the tool insert becomes caught or
jammed, the drive to the drill spindle is
interrupted.
Because of the forces that
occur, always hold the power tool firmly
with both hands and provide for a secure
stance.
►
If the power tool jams, switch the ma-
chine off and loosen the tool insert.
When switching the machine on with
the drilling tool jammed, high reaction
torques can occur.
The tool holder is now locked.
►
The mode selector switch must always be
locked in the “Chiselling” position when
chiselling.
Working Advice
►
Before any work on the machine itself, pull
the mains plug.
Maintenance and Service
Maintenance and Cleaning
►
Before any work on the machine itself,
pull the mains plug.
►
For safe and proper working, always
keep the machine and ventilation slots
clean.
►
A damaged dust protection cap should
be changed immediately. We recom-
mend having this carried out by an af-
ter-sales service.
►
Gearbox lubrication interval. This rock
drill does not require hourly or dai-
ly lubrication as its gearbox is filled
with the correct amount of grease at
the factory. However, after 200 hours
- with intensive work, or once every 6
months - with rare use, it is necessary
to change the lubricant in the rotary
hammer gearbox. We recommend that
this maintenance operation be carried
out at an authorized service center of
the company, since disassembly of the
perforator and flushing of the gear and
shock-compression mechanism of the
gearbox is required.
When the battery is no longer operative,
please refer to an authorised after-sales ser-
vice agent for P.I.T. power tools.
Service
►
Have your power tool repaired only by
qualified personnel using original spare
parts. This ensures the safety of the power
tool.
A list of authorized service centers can be
found on the official website of P.I.T. link:
https://pittools.ru/services/
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials
must be recycled and reused in an envi-
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-