9
3
4
1
2
1
2
always double cHeck your lines before launcHing. wrongly attacHed
lines will stoP tHe kite flying correctly and could tHerefore Mean you
HaVe no control of tHe kite Putting yourself in a dangerous situation.
2
3
quick release connection
below tHe bar release (recoMMended Mode)
adVanced riders (use at your own risk, not recoMMended)
seCUrity
The Quick Release is the primary connection
to the kite. Make sure you connect to the Quick
Release using the finger as shown in the pictures.
All riders should attach their Kite Leash to the Flag Out System. This is the small eyelet on the Stainless
Steel Swivel Ring.
When the release is activated, the kite will flag out and fall to the water/ground.
In all situations make sure that all lines are clear of all working release systems and the kite leash is
connected in the right way.
Riders performing unhooked tricks or who are more confident and have spent many hours Kiting can
attach in Expert mode, where the loop part runs through the large eye of the steel ring. When letting
go of the bar in Expert mode (without activating the release e.g. missed handle pass) the kite will
depower but WILL NOT flag out. Be aware in this situation, the Quick Release will be out of reach and can
therefore not be released. When hooked in and activating the Quick Release the steel ring automatically
slips off and the kite will flag out.
all line to kite connections are made using a “larks Head” knot.
secure
1
Summary of Contents for Hyperlink V3
Page 1: ...1 Hyperlink V3 Manual ...
Page 24: ......