Ozone Hyperlink V3, Manual

Page: 8 / 24

8
h y p e r l i n k v 3 M a n u a l
bar set-uP
1 2
3 4
1 4 3 2
kite set-uP
set-UP
• Unfold the kite on the ground, in the direction of the wind.
• Fold over the upwind wing tip and use the sandbag provided or put some snow, sand, or your board
on the tip to secure the kite.
• Take the speed system from the Velcro retainer and lay out on the ground. Untangle if necessary.
• Take the bar and unwind the lines at 90 degrees to the kite. (Bars are delivered with the flying lines
already connected.)
• Connect the lines to the kite following the numbered label system ensuring all lines are free from each
other.
Now you’re ready to fly!
1 2
3 4
iMPortant: set uP your kite for tHe first tiMe in wind less tHan 12kPH to
ensure your safety and tHe safety of otHers.
wind