AM5000 Doc. No. 290-062-00 rev. A June 2005
Appendix A
SETTING GUIDE
1) Calculate the room volume (length x width x height)
2) Set the output of the machine to suit the room size and odour by altering the timer.
3) Each segment on the timer is equivalent to 15 minutes.
For example, to run the generator for 30 minutes per hour for 2 hours: (a) push down two segements at the
time setting you want the generator to start; (b) leave the next two segments "up"; c) push down the next
two segments.
4) Do not enter the treated room until at least
two hours
after the ozone generator has stopped.
Example
A room measures 20m x 5m x 3m. So its volume is 300m
3
From the chart, the unit can be set at any level to be effective at removing odours. The stronger the odour
the higher the setting.
If the room to be treated is clear of people at 18.00hrs and access is not needed until 07:00hrs the following
morning, the timer should be programmed to turn on at 19:00hrs, run for 9 hours and turn off at 04:00hrs the
following morning.
This will allow 3 hours for the room to be safe to enter.
The warning signs on the entrances should state that the room should not be entered between 18:00hrs and
07:00hrs.
ROOM
VOLUME
timer setting (mins per hour)
m
3
15
30
60
100
X
150
X
200
300
400
500
600
700
800
900
1000
1500
2000
Note
:
15 minutes = 1 segment in 4
30 minutes = 2 timer segments in 4
60 minutes = 4 timer segments in 4
X
NOT RECOMMENDED
RECOMMENDED
OZONE LEVEL TOO LOW TO BE EFFECTIVE
